Trainer: Mr. JOEY M. MORETO
Welcome to this online training of Facilitating eLearning Sessions! This course is designed to enhance your knowledge, skills, positive attitude and work values in accordance with the prevailing standards in the Technical-Vocational Education and Training (TVET) sector. This encompasses competencies required to facilitate eLearning sessions.
OBJECTIVES
At the end of this module, you should be able to:
• Establish the eLearning Environment
• Facilitate eLearning Sessions
• Monitor Learning Progress
• Review and Evaluate eLearning Course
AUTOMOTIVE SERVICING NC II
SERVICE STARTING SYSTEM
BLENDED TRAINING
The AUTOMOTIVE SERVICING NC II qualification consists of competencies that a person must achieve to inspect, clean, and repair mechanical or electrical parts, components, assemblies, and sub-assemblies of light and heavy-duty automotive vehicles with diesel or gas engines in accordance with manufacturer’s specifications. It also covers servicing of engine mechanical components such as cooling and lubricating systems and performing powertrain and underchassis servicing and repair.
OBJECTIVES:
At the end of this module, the trainee will be able to:
Service Automotive Battery
Service Ignition System
Test and Repair Wiring/Lighting System
Service Starting System
Service Charging System
Service Engine Mechanical System
Service Clutch System
Service Differential and Front Axle
Service Steering System
Service Brake System
Service Suspension System
Perform Under chassis Preventive Maintenance
Overhaul Manual Transmission
Automotive Servicing NC II
Trainer: Christian Jonel Idian
The AUTOMOTIVE SERVICING NC II Qualification consists of competencies that
a person must achieve to inspect, clean and repair mechanical or electrical parts,
components, assemblies and sub-assemblies of light and heavy-duty automotive vehicle
with diesel or gas engine in accordance with manufacturer’s specification. It also covers
servicing of engine mechanical components such as cooling and lubricating system;
performing power train and under chassis servicing and repair.
At the end of this module, you should be able to:
Service Automotive Battery
Service Ignition System
Test and Repair Wiring/Lighting System
Service Starting System
Service Charging System
Service Engine Mechanical System
Service Clutch System
Service Differential and Front Axle
Service Steering System
Service Brake System
Service Suspension System
Perform Under chassis Preventive Maintenance
Overhaul Manual Transmission
Welcome to BARISTA NC II Qualification Trainee's!
The BARISTA NC II Qualification consists of competencies that a person must achieve in the deliverance of good quality coffee in commercially-operated cafes or specialty coffee shops. This qualification is specific to a person who specializes in making coffee beverages.
OBJECTIVES:
At the end of this module, you should be able to:
Welcome to this blended training of Bread and Pastry Production NC II. The BREAD AND PASTRY PRODUCTION NC II qualification consists of
competencies that person must achieve to be able to clean equipment , tools and utensils and prepare, portion and plate pastries, breads and other dessert items to guests in hotels, motels, restaurants, clubs, canteens, resorts and luxury lines/cruises and other related operations.
Welcome to this blended training of Bread and Pastry Production NC II. The BREAD AND PASTRY PRODUCTION NC II consists of competencies that person must achieve to be able to clean equipment , tools and utensils and prepare, portion and plate pastries, breads and other dessert items to guests in hotels, motels, restaurants, clubs, canteens, resorts and luxury lines/cruises and other related operations.
OBJECTIVES
At the end of this module, you should be able to:
1. Prepare and Produce Bakery Products
2. Prepare and Produce Pastry Products
3. Prepare and Present Gateaux, Tortes and Cake
4. Prepare and Display Petits Fours
5. Present Desserts
Welcome to Caregiving NC II Qualification Trainee's!
The CAREGIVING NC II Qualification consists of competencies that a person must achieve to provide care and support to infants/toddlers, provide care and support to children, foster social, intellectual, creative and emotional development of children, foster the physical development of children, provide care and support to elderly, provide care and support to people with special needs, maintain healthy and safe environment, respond to emergency, clean living room, dining room, bedrooms, toilet and bathroom, wash and iron clothes, linen, fabric, prepare hot and cold meals.
11 Core Competencies in Caregiving NC II
Welcome to Caregiving NC II
This qualification consists of competencies that a person must achieve to provide care and support to infants/toddlers, provide care and support to children, foster social, intellectual, creative and emotional development of children, foster the physical development of children, provide care and support to the elderly, provide care and support to people with special needs, maintain healthy and safe environment, respond to emergency, clean living room, dining room, bedrooms, toilet and bathroom, wash and iron clothes, linen, fabric, prepare hot and cold meals.
CAREGIVING NC II - CORE COMPETENCIES
Welcome to Computer Systems Servicing NCII!
The COMPUTER SYSTEMS SERVICING NCII Qualification consists of competencies that must posses to enable and configure computers systems, set-up computer networks and servers and to maintain and repair computer systems and networks.
Computer System Servicing NC II
(280 Hours / 35 Days)
Trainer: GINA C. TUBEO
OBJECTIVES:
At the end of this course, you should be able to:
1. Install and configure computer systems
2. Set-up Computer Networks
3. Set-up Computer Servers
4. Maintain and Repair Computer Systems and Networks
Computer System Servicing NC II
Trainer: Job Vincent A. Aguilar
(280 Hours / 35 Days)
Blended Training / Laboratory-Based Competency Development
Welcome to this online module of Set-up Computer Servers!
This module covers competencies that must be possessed to enable learners to set up computer servers, including setting up user access, configuring network services, and performing testing, documentation, and pre-deployment procedures in accordance with the requirements of the computer server environment.
OBJECTIVES
At the end of this module, you should be able to:
Welcome to Computer Systems Servicing!
COMPUTER SYSTEMS SERVICING NC II
(280 Hours / 35 DAys)
Trainer : Benmar E. Tubeo
The COMPUTER SYSTEMS SERVICING NC II Qualification consists of competencies that must possess to enable to install and configure computers systems, set-up computer networks and servers and to maintain and repair computer systems and networks.
OBJECTIVES
At the end of this course, you should be able to:
1. Install and Configure Computer Systems
2. Set-up Computer Networks
3. Sett-up Computer Servers
4. Maintain and Repair Computer Systems and Networks
(280 Hours / 35 Days)
OBJECTIVES
At the end of this module, you should be able to:
COOKERY NC II
TRAINER: DAHN HARLEY M. PANOY
Blended Learning
(316 hours / 40 days)
INTRODUCTION
This course covers the outcome required to achieve the Cookery NC II qualification, equipping trainees with the essential competencies to clean and maintain kitchen areas, prepare hot and cold meals, and create desserts suitable for guests in diverse food and beverage service facilities. The program emphasizes both technical skills and professional standards, ensuring graduates are capable of delivering quality culinary services in line with industry practices.
Objectives
At the end of this course, you should be able to
1. Clean and maintain kitchen premises
2. Prepare stocks, sauces, and soups
3. Prepare appetizers
4. Prepare salads and dressings
5. Prepare sandwiches
6. Prepare meat dishes
7. Prepare vegetable dishes
8. Prepare egg dishes
9. Prepare starch dishes
10. Prepare poultry and game dishes
11. Prepare seafood dishes
12. Prepare desserts
13. Package prepared food
By completing the lessons, activities, and assessments in this course, you will be guided to practice proper sanitation and maintain kitchen premises, ensuring that your work area is always safe and organized. You will learn to prepare foundational stocks, sauces, and soups, then move on to creating appetizers, salads, dressings, and sandwiches that showcase both flavor and presentation. As you progress, you will strengthen your skills in cooking meat, vegetables, eggs, starches, poultry, game, and seafood dishes, applying correct techniques and observing food safety standards. You will also gain the ability to produce a variety of desserts that balance taste with attractive design. Finally, you will be trained to package prepared food appropriately, ensuring its quality, hygiene, and readiness for service or storage.
DRIVING NC II
Welcome to this blended training of Driving NC II (Carry Out Minor Vehicle Maintenance and Servicing). This course consists of competencies that a person must achieve to operate light motor vehicles classified under LTO restriction code 1 and 2; transport passengers and loads over specified routes to local or district location and collect fare duly authorized by the relevant government agency; comply with traffic rules and regulations and perform minor vehicle repairs and other minor servicing.
At the end of this module, you should be able to:
1. Carry Out Vehicle Maintenance and Servicing
2. Drive Light Vehicles
3. Obey, and observe Traffic Rules and Regulations
4. Implement and Coordinate Accident-Emergency Procedures
Welcome to this e-Learning Module, this module covers the knowledge, skills and attitudes on selecting and installing wiring devices, installing lighting fixtures/switches and notifying completion of work of floor and wall mounted outlets and auxiliary outlets.
This learning module is designed to support e-learning and blended learning delivery for Electrical Installation and Maintenance NC II. It combines online self-paced learning, trainer-guided virtual activities, demonstrations, offline hands-on practice, assessment, and reflection.
Welcome to The Electrical Installation and Maintenance NC II Qualification consists of competencies that a person must achieve to enable him/her to install and maintain electrical wiring, lighting and related equipment and systems where the voltage does not exceed 600 volts in residential houses/buildings.
OBJECTIVES
At the end of this module, you should be able to:
Welcome to this Training program in Electrical Installation and Maintenance NC II Qualification consists of competencies that a person must achieve to enable him/her to install and maintain electrical wiring, lighting and related equipment and systems where the voltage does not exceed 600 volts in residential houses/buildings. . This encompasses competencies required on Electrical Installation and Maintenance NCII.
OBJECTIVES
At the end of this module, you should be able to:
· Perform roughing-in activities, wiring and cabling works for single-phase distribution, power, lighting and auxiliary systems
· Install electrical protective devices for distribution, power, lighting, auxiliary, lightning protection and grounding systems
· Install wiring devices of floor and wall mounted outlets, lighting fixtures/switches, and auxiliary outlets
Shielded Metal Arc Welding NCII
Trainer: Jonaliza Siervo
Welcome to this training program on Weld carbon steel plates and pipes using SMAW, a core competency under Shielded Metal Arc Welding NC II, this module identifies the competence required to: Perform Capping.
OBJECTIVES
At the end of this module, you should be able to:
1. Learn the essential of welding
2. Perform safe welding practices
3. Weld defects, cause and remedies
4. Perform Welding Procedure and Specifications (WPS)
5. Perform acceptable weld profiles
6. Practice welding technique and procedure
Welcome to Shielded Metal Arc Welding (SMAW) NC II module for Carbon Steel Plate and Pipe. This short course module equips trainees with the technical knowledge, practical skills, and safety discipline required to thoroughly clean and inspect a deposited root pass on carbon steel plates and pipes prior to applying subsequent weld passes.
In multi-pass welding, any residual slag or surface impurity left on the root pass causes internal defects such as slag inclusions and lack of fusion, compromising structural integrity under AWS D1.1 and ASME IX code standards.
Qualification: Shielded Metal Arc Welding (SMAW) NC II
Unit of Competency: Weld Carbon Steel Plates Using SMAW
Learning Outcome 2 (LO2): Clean Root Pass
Delivery Mode: Blended / Online E-Learning (Synchronous & Asynchronous)
